With seventeen lapped faces this prism divides the circle into steps of about 21.18 degrees, giving metrology rooms a dense angular reference for instruments that cannot be zeroed at convenient angles.
GCr15 bearing steel is through hardened to HRC62-65 before fine lapping, so the working faces keep their flatness and reflectivity over years of handling in workshop conditions.
| Parameter | Value |
|---|---|
| Material | GCr15 bearing steel |
| Number of Sides | 17 |
| Index Angle | 21.18 degrees (360/17) |
| Accuracy Grade | Grade 0 / Grade I |
| Manufacturing deviation of working angle | ±1″ (Grade 0) / ±2″ (Grade I) |
| Surface roughness of working face | Ra ≤ 0.025µm |
| Flatness of working face | 0.03µm (Grade 0) |
| Verticality between working surface and positioning surface | ±10″ |
| Hardness | HRC62-65 |
| Prism thickness | 17-20mm |
| Excircle diameter | φ80-φ150mm |
The odd sided geometry is used where a dense angular reference has to be traced back to a single certified face.
The minimum order quantity is 1 piece, so single pieces can be ordered for testing.
Yes. Grade 0 and Grade I accuracy are both available, and working angle deviation can be specified in arcseconds.
Each prism is packed in a protective carton with shock-proof foam, and bulk orders ship in export-grade wooden cases.