Twenty four faces at exactly 15 degree steps make this prism the standard reference for turntable calibration, where each step has to be proven against a traceable angular standard.
Working angle deviation is held at 0.3 arcsecond, and the GCr15 steel body with HRC62-65 hardness keeps that accuracy after repeated lapping and cleaning cycles.
| Parameter | Value |
|---|---|
| Material | GCr15 bearing steel |
| Number of Sides | 24 |
| Working Angle | 15 degrees |
| Accuracy Class | 0.3 arcsecond |
| Manufacturing deviation of working angle | ±0.3″ |
| Surface roughness of working face | Ra ≤ 0.025µm |
| Flatness of working face | 0.03µm |
| Verticality between working surface and positioning surface | ±10″ |
| Hardness | HRC62-65 |
| Prism thickness | 17-20mm |
| Excircle diameter | φ80-φ150mm |
Where a turntable has to be certified against a national standard, the 24 sided prism gives a complete circle check in fifteen degree increments.
The minimum order quantity is 1 piece, so single pieces can be ordered for testing.
Yes. Grade 0 and Grade I accuracy are both available, and working angle deviation can be specified in arcseconds.
Each prism is packed in a protective carton with shock-proof foam, and bulk orders ship in export-grade wooden cases.