The 7 sided regular polyhedron prism is machined from GCr15 bearing steel, hardened to HRC62-65 and lapped to a polished surface. Each working face stands at 360/7 degrees of arc so the prism can index a full circle with a single reference face.
Flatness of the working faces is held within 0.03 micron and verticality between working face and datum plane stays inside the arcsecond tolerance, which makes this prism a dependable angle standard for workshop and laboratory calibration.
| Parameter | Value |
|---|---|
| Material | GCr15 bearing steel |
| Number of Sides | 7 |
| Working Angle | 60 degrees |
| Accuracy Grade | Grade 0 / Grade I |
| Manufacturing deviation of working angle | ±1″ (Grade 0) / ±2″ (Grade I) |
| Surface roughness of working face | Ra ≤ 0.025µm |
| Flatness of working surface | 0.03µm (Grade 0) |
| Verticality between working surface and positioning surface | ±10″ |
| Hardness | HRC62-65 |
| Excircle diameter | φ80mm |
| Prism thickness | 17-20mm |
| Rotating center aperture | φ25mm |
The hardened steel body resists edge chipping during daily shop floor use, while the sub micron surface keeps reflected beam quality stable.
The minimum order quantity is 1 piece, so single pieces can be ordered for testing.
Yes. Grade 0 and Grade I accuracy are both available, and working angle deviation can be specified in arcseconds.
Each prism is packed in a protective carton with shock-proof foam, and bulk orders ship in export-grade wooden cases.